Phase, App.measure.px.operator (paramengine = "phase") – Teledyne LeCroy WavePro Automation Command User Manual
Page 628

Automation Command and Query Reference Manual - Processor Reference
HighPct
Double
From 60 to 90 step 1
Range
High level in percent.
Description
LowPct
Double
From 10 to 40 step 1
Range
High level in percent.
Description
PHASE
app.Measure.Px.Operator (ParamEngine = "Phase")
OutputType
Enum
Sets/Queries the output type for Phase Px.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set parameter P1 to phase difference.
app.Measure.P1.ParamEngine = "Phase"
' Set the output unit as radians.
app.Measure.P1.Operator.OutputType = "Radians"
Example
Values
Degrees
DEGREES360
Percent
Radians
RADIANSTWOPI
OutputType
Enum
RefFindLevel
Action
RefHysteresis
Double
RefLevelType
Enum
RefPercentLevel
Double
RefSlope
Enum
SigFindLevel
Action
SigHysteresis
Double
SigLevelType
Enum
SigPercentLevel
Double
SigSlope
Enum
2-129
918501 RevA