Teledyne LeCroy WavePro Automation Command - Manual (Page 519)

Automation Command and Query Reference Manual - Processor Reference
FirOrIir Enum
Sets/Queries whether the filter Fx is an FIR filter or an IIR filter.
Description
Values
FIR Finite Impulse Response Filter
IIR Infinite Impulse Response Filter
FitAlways Bool
LowFreqPass Double
From 1000 to 1e+011 step 1 Range
Sets/Queries the lower cut-off frequency for the band-pass filter Fx.
Description
NumberOfTaps Integer
From 3 to 2001 step 1 Range
Sets/Queries the number of taps in the filter Fx. Valid only when the AutoLength control is set to False.
Description
PassBandRipple Double
From 0.5 to 20 step 0.1 Range
Sets/Queries the pass-band ripple.
Description
ReframeOutput Bool
SampleRateText String
Any number of characters Range
StopBandAttenuation Double
From 10 to 100 step 0.001 Range
Sets/Queries the stop-band attenuation of the filter Fx.
Description
TransitionWidth Double
From 0 to 1e+011 step 1 Range
Sets/Queries the width of the transition in the frequency spectrum of filter Fx.
Description
FLOOR
app.Math.Fx.OperatorYSetup (Operator = "Floor")
Most negative or minimum values for an ensemble of sweeps, or "Floor"
2-20
918501 RevA