Teledyne LeCroy WavePro Automation Command - Manual (Page 372)

Automation Command and Query Reference Manual - Control Reference
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
RESULT app.SDA2.PCIe.Parameters.VdiffPP.Out.Result
VTXCM app.SDA2.PCIe.Parameters.VTxCm
Transmitter common mode voltage
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ClearSweeps Action
View Bool
RESULT app.SDA2.PCIe.Parameters.VTxCm.Out.Result
VTXDE app.SDA2.PCIe.Parameters.VTxDe
De-emphasis in dB. This measurement should be made at the transmitter's pins, otherwise what is being measured
is the remaining de-emphasis after some is used up by the fixture or channel.
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
ClearSweeps Action
View Bool
1-358
918501 RevA