Teledyne LeCroy WavePro Automation Command - Manual (Page 350)

Automation Command and Query Reference Manual - Control Reference
ShowLastTrace Bool
Sets/Queries the state of the Show Last Trace control. If True then when this trace is displayed in
persistence mode the last acquired waveform will be superimposed on the accumulating persistence
map.
See the general description above for a discussion of the locked and unlocked persistence modes.
Description
UseGrid String
Any number of characters Range
SDA2 software sets this control to place the SSC Track (SSCTrk1 or SSCTrk2) on a particular grid.
Do not set this control.
Description
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ViewLabels Bool
Sets/Queries whether the user-defined labels for the trace are visible.
See Also: LabelsPosition and LabelsText controls.
Description
RESULT app.SDA2.JitterMeasure.Spectrum.SSCTrkx.Out.Result
TRACK app.SDA2.JitterMeasure.Track
ShowPLLTrack Bool
The PLLTrack is a time domain trace of PLL frequency. Its shape reflects the jitter and wander that
the PLL tracked, and therefore does not appear in jitter values. (The PLL Track trace is automatically
framed for the display; if you turn this on and the trace is not visible, probably the Zoom is not reset -
the zoom state persists and may no longer be appropriate. Click on the PLLTrack descriptor box, that
brings up the Zoom of PLLTrack tab on the right side dialog. Look at the Zoom of PLLTrack settings,
and press Reset Zoom.)
Description
ShowPLLTrack Bool
ShowRjBUjTrack Bool
ShowTIETrack Bool
1-336
918501 RevA