Teledyne LeCroy WavePro Automation Command - Manual (Page 599)

Automation Command and Query Reference Manual - Processor Reference
HighPct Double
From 60 to 90 step 1 Range
High level in percent.
Description
LowPct Double
From 10 to 40 step 1 Range
High level in percent.
Description
EYEHEIGHT
app.Measure.Px.Operator (ParamEngine = "EyeHeight")
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
CalcUnits Enum
Specifies the units of the parameter readout, linear (volts), or decibels.
Description
Values
dB
linear
CursorDisplay Enum
Set/Query the CursorDisplay cvar. This defines whether the source trace is annotated with 'Help
Markers' generated by the measurement.
Description
Values
Detailed
Off
Simple
Aperture Double
CalcUnits Enum
CursorDisplay Enum
2-100
918501 RevA