Teledyne LeCroy WavePro Automation Command - Manual (Page 601)

Automation Command and Query Reference Manual - Processor Reference
CursorDisplay Enum
Set/Query the CursorDisplay cvar. This defines whether the source trace is annotated with 'Help
Markers' generated by the measurement.
Description
Values
Detailed
Off
Simple
EYEOVERSHOOTNEGATIVE
app.Measure.Px.Operator (ParamEngine = "EyeOvershootNegative")
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
Aperture Double
EYEOVERSHOOTPOSITIVE
app.Measure.Px.Operator (ParamEngine = "EyeOvershootPositive")
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
Aperture Double
EYEPKPKNOISE
app.Measure.Px.Operator (ParamEngine = "EyePkPkNoise")
Aperture Double
Level Enum
2-102
918501 RevA