Parameters, Sd2skew, Result – Teledyne LeCroy WavePro Automation Command User Manual
Page 365
![background image](/manuals/353449/365/background.png)
Automation Command and Query Reference Manual - Control Reference
PCIeStandard
Enum
The PCIe Signal Quality (electrical compliance) test can be selected for PCIE 1.0a or PCIE 1.1
Description
Values
PCIExpress1.0a
PCIExpress1.1
ShowPCIeMeasure
Bool
When this control is set to True, the measurement set selected in PCIeMeasurement is calculated
and displayed.
Description
PARAMETERS
app.SDA2.PCIe.Parameters
PCIeTestGroup
Enum
This control selects either PCIeMeasurements (see that, on the previous page) or the Signal Quality
test (electrical compliance test).
Description
Values
PCIEMeasurement
PCIESignalQuality
PCIeTestGroup
Enum
SD2SKEW
app.SDA2.PCIe.Parameters.SD2Skew
ClearSweeps
Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
View
Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ClearSweeps
Action
View
Bool
RESULT
app.SDA2.PCIe.Parameters.SD2Skew.Out.Result
1-351
918501 RevA