Teledyne LeCroy WavePro Automation Command - Manual (Page 355)

Automation Command and Query Reference Manual - Control Reference
HorZoom Double
From 0.1 to 1e+006 step (8 digits) Range
Horizontal Zoom setting. Locked to a 1, 2, 5 sequence unless VariableHorZoom is set to True .
Description
ResetZoom Action
Resets the zoom settings to their default values.
Description
VariableHorZoom Bool
Enable/Disable the variable Horizontal Zoom control. If enabled, the HorZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
VariableVerZoom Bool
Enable/Disable the variable Vertical Zoom control. If enabled, the VerZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
VerPos Double
From -1.5 to 1.5 step (8 digits) Range
Vertical Position of the trace, normalized to a value between -1.5 and 1.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
VerZoom Double
From 0.1 to 100 step (8 digits) Range
Vertical Zoom setting. Locked to a 1, 2, 5 sequence unless VariableVerZoom is set to True .
Description
RJBUJTRACK app.SDA2.JitterMeasure.Track.RjBUjTrack
AxisXRotation Integer
AxisYRotation Integer
ClearSweeps Action
LabelsPosition String
LabelsText String
Persist3DQuality Enum
PersistDotJoined Bool
Persisted Bool
Persistence3d Bool
PersistenceMonoChrome Bool
PersistenceSaturation Integer
PersistenceTime Enum
ShowLastTrace Bool
1-341
918501 RevA