Teledyne LeCroy WavePro Automation Command - Manual (Page 337)

Automation Command and Query Reference Manual - Control Reference
ShowLastTrace Bool
Sets/Queries the state of the Show Last Trace control. If True then when this trace is displayed in
persistence mode the last acquired waveform will be superimposed on the accumulating persistence
map.
See the general description above for a discussion of the locked and unlocked persistence modes.
Description
UseGrid String
Any number of characters Range
SDA2 sets this control to place the PJ IFFT on a particular grid. Do not change this setting.
Description
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ViewLabels Bool
Sets/Queries whether the user-defined labels for the trace are visible.
See Also: LabelsPosition and LabelsText controls.
Description
RESULT app.SDA2.JitterMeasure.Spectrum.PjInvFFT.Out.Result
ZOOM app.SDA2.JitterMeasure.Spectrum.PjInvFFT.Zoom
HorPos Double
From -0.5 to 0.5 step (8 digits) Range
Horizontal Position of the trace, normalized to a value between -0.5 and 0.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
HorPos Double
HorZoom Double
ResetZoom Action
VariableHorZoom Bool
VariableVerZoom Bool
VerPos Double
VerZoom Double
1-323
918501 RevA