Datamax-O'Neil H-Class Operator’s Manual - Manual (Page 81)

H-Class 71
Diagnostics (continued)
Menu Item Details
TEST SCANNER
Tests the Linear Scanner, where:
ALIGNMENT TEST
Reads a bar code then displays the decoded data, the
code type and scan count, repeating.
SCAN TEST Reads a bar code then displays the decoded data, the
code type and scan count, non-repeating.
TEST RFID
Tests RFID, where:
TAG DATA Reads the data encoded on a tag.
DEVICE VERSION
Displays the type and version of the encoding device.
TAG ID – HF ONLY
Reads then displays the High Frequency Tag ID.
PRINT TEST RATE (min) Allows a label-to-label delay when batch printing Test
Labels, where:
(0 – 120)
000 Is the selected interval, in minutes.
SENSOR READINGS Displays various sensor values (0 – 255), where:
THR TRAN RIBM 24V
127 159 093 175
PS HD RANK
000 254 125
Are readings for the printhead thermistor sensor
(THR), media “gap” sensor (TRAN) or “reflective”
sensor (REFL), ribbon sensor (RIBM), 24VDC power
supply sensor (24V), present sensor (PS), printhead
assembly sensor (HD) and, printhead ranking resistor
(RANK). (The values given here are examples only.)
RIBBON SENSOR LIMITS
Displays ribbon sensor values (0 – 255) for thermal
transfer equipped printers, where:
RIBBON ADC LOW
9
RIBBON ADC HIGH
245
Are the sensor readings. (The values given here are
examples only.)
iPH REPORT
Displays the IntelliSEAQ™ data (including the
printhead serial number, and installation and
maintenance dates), where:
VIEW
Displays the data.