Datamax-O'Neil H-Class Operator’s Manual - Manual (Page 13)

H-Class 3
1.1.2 Optional Features (available except as noted)
The following optional features are offered for the printer:
40 mm Media Hub (H-4xxx and H-4xxxX models only)
A media hub that accommodates 40-millimeter cores.
DMXrfNetII
A WiFi Ethernet card with many features, including:
802.11b WiFi LAN standards-based technology
Integrated module with radio, baseband, MAC, and application processors
Built-in TCP/IP and UDP for flexible LAN connectivity options
Built-in Web server for drop-in LAN and internet connectivity
Built in WEP security protocol
Integrated command interface that eliminates complicated software drivers
External Media Rewinders
Precision-crafted, bi-directional rewinding mechanisms with device-dependant features:
DMXREW1 - accepts 1 to 4 inch (25 to 101 mm) diameter core that is up to 4.5
inches wide (114 mm), and rewinds to an 8-inch (203 mm) maximum outer
diameter at 10 inches per second.
DMXREW2 – accepts a 3-inch (76 mm) diameter core that is up to 9.5 inches wide
(241 mm), and rewinds to a 12-inch (304 mm) maximum outer diameter at 30
inches per second.
ILPC Fonts
Font sets that allow International Language Print Capability, consisting of one of the
following:
CG-Times (western European) Scalable
Kanji Gothic B Scalable
Simplified Chinese GB Scalable
Korean Hangul
Internal Rewinder, Power-Assisted (Standard models only)
An internal mechanism to wind printed labels, or backing material when using a Peel and
Present option, into a maximum outer diameter roll of five and half inches (139 mm).
Internal Rewinder, Powered "Full Roll" (Tall models only)
A motorized internal mechanism to wind printed labels, or pull the backing material when
using a Peel and Present option, into to a maximum outer diameter roll of eight inches (203
mm).