Datamax-O'Neil H-Class Operator’s Manual User Manual
Page 79
H-Class
69
Communications (continued)
Menu Item
Details
PROCESS SOH (DATA)
Determines the response to an Immediate Command
(e.g., Get Status, Module Storage, etc.), where:
DISABLED
Processes commands normally.
ENABLED
Interrupts operations upon SOH receipt to process the
command.
4.2.6 Diagnostics
The Diagnostics menu contains testing functions:
Menu Item
Details
HEX DUMP MODE
Determines how the printer handles host data, where:
DISABLED
Processes data normally.
ENABLED
Prints received ASCII data without interpretation or
processing; see Section 6.2.
FILE CAPTURE
Saves received data to Module G (or Module H, if
present) in the form dmx_xxx_yyy.dpl where the
count (yyy) is incremented for every capture and a
unique time stamp (xxx) is assigned.
OPTIONS TESTING
Performs option diagnostics, where:
TEST PRESENT SENSOR
Tests the Present Sensor (including the sensor in the
Peel & Present option), where:
LABEL PRESENTED
Is displayed when the sensor is blocked.
LABEL NOT PRESENTED
Is displayed when the sensor is not blocked.
TEST CUTTER
Tests the Cutter, where:
PERFORM TEST
001 TIMES
Selects the number of cuts (1 – 999) to perform and
then displays the PASS / FAIL results for each
attempt.