Datamax-O'Neil H-Class Operator’s Manual - Manual (Page 43)

H-Class 33
4.1.2 Keypad Functions
The Keys and Buttons of the Keypad (see Section 4.1) control printer functions:
• The Soft Keys are mode-dependent, changing functions as needed; and,
• The Navigation Buttons allow movement through and changes to menu items and
parameters, where the highlighted item is selectable (by pressing ENTER) or enabled
(e.g., a default setting).
Depending upon the printer’s state, many functions can be accessed by pressing (or
pressing and holding for various durations) the keys and buttons:
Keypad Functions
Function
Printer
State
Pressing Sequence
Related
Section
Calibration, Empty Value Idle Long PAUSE & FEED 5.2
Calibration, RFID Option Idle Long FEED & TEST 4.2.3
Calibration, Quick Idle Long FEED 3.4
Display Contrast Adjustment Idle Hold MENU 4.1
Display large fonts Idle DOWN ARROW 4.1.1
Feed / Clear Fault Idle FEED 4.1
Pause Idle PAUSE 4.1
Print Label, Configuration Idle FEED & CANCEL 4.3.5
Print Label, Network Idle PAUSE, FEED, & CANCEL 4.2.5
Print Label, Quality Idle PAUSE & FEED 4.3.1
Reset, Soft Idle Long CANCEL 5.3.1
System Menu Idle MENU 4.2
Test Menu Idle TEST 4.3
Boot Mode Power-Up Hold PAUSE & TEST 5.7
Hex Dump Mode Power-Up Hold FEED 6.2
Reset, Level 1 Power-Up PAUSE & FEED 5.3.2
Reset, Level 2 Power-Up Hold PAUSE, FEED, & CANCEL 5.3.3