Datamax-O'Neil H-Class Operator’s Manual - Manual (Page 114)

104 H-Class
Font Download Messages (continued)
Displayed Message Descriptions / Possible Causes / Solutions
SYSTEM FAULT
Insufficient memory space for the file exists in the destination
module. Try selecting a different destination module or clear
some space on the module and perform the download again.
WRITING FLASH
The file was successfully decrypted, verified, and is now being
written into the destination module.
WRITING FLASH
FAILED
The file failed checksum verification after being written to the
module. Try the download again; however, if the problem
continues call for service.
Processing TrueType Fonts
To process TrueType fonts (.TTF) on an external module for use by the printer:
1.Use Windows Explorer to download the font to a module.
2.Install the module in the printer.
3. Press the MENU button then select Printer Options.
4. Select Modules and then Process File.
5.Select the module ID and the font file.
6.When prompted enter a 2 character font ID, and then the destination module ID.
7.Ensure that your label formats use the same font ID as assigned in Step 5.
Copying TrueType Fonts
To copy TrueType fonts (.TTF) to an external module for use by the printer:
1.Use Windows Explorer to download the font to the module.
2.Add a 2 digit DPL font ID to the file name (50-99, 9A-9Z, 9a-9z) then change the
file extension to .dtf (for example, arial50.dtf); see Scalable Font Downloading in
the Class Series 2 Programmer’s Manual.
3.Install the module in the printer.
4.Ensure that your label formats use the same font ID as assigned in Step 2.
Removing Fonts
When deleting a plug-in, all files contained within that directory will be deleted as well; see
MODULES / DELETE FILE, Section 4.2.3.