Datamax-O'Neil H-Class Operator’s Manual - Manual (Page 143)

H-Class 133
Appendix A
Module Assignments, and File Handling Definitions and Messages
Module Assignments
Memory Module
Designator Definition / Location
D DRAM (Main Logic Card)
F SD Memory Card (Optional, for port-equipped models only)
G FLASH (Main Logic Card)
H USB Thumbdrive (Optional, for port-equipped models only)
I USB Thumbdrive (Optional, for port-equipped models only)
X FLASH (Main Logic Card)
Y FLASH (Main Logic Card)
File Handling Definitions
The following file types are supported and, as noted, converted by the printer.
Process File Handling (see Section 4.2.3)
File Type Definition / Requirements
BMP, PCX, and IMG Industry standard black and white graphics formats.
BS Boot Loader upgrade file.
F7B A 7-bit image load file.
LS
Language message file in a single or double byte format
generated from an Excel spread sheet via macros.
PLG A file group containing hidden, encrypted, or normal files.
SFL and SFP
Industry standard portrait and landscape bit-mapped font
formats, where the label name should contain the Font ID as
last three digits before the file extension to allow automated
conversion (see DBM, below).
TTF
Industry standard true type / scalable font formats, where the
label name should contain the Font ID as last two digits before
the file extension to allow automated conversion (see DTT,
below).
ZS and ZG A compressed firmware upgrade file.