Datamax-O'Neil H-Class Operator’s Manual - Manual (Page 64)

54 H-Class
System Settings (continued)
Menu Item Details
FORMAT ATTRIBUTES Defines the way overlapping text, bar codes, and
graphics are printed, where:
TRANSPARENT
Prints intersecting areas, for example:
XOR
Obliterates intersecting areas, for
example:
OPAQUE
Overwrites intersecting areas with
those last formatted, for example:
LABEL ROTATION Allows the label format to be flipped 180 degrees,
where:
ENABLED
Prints formats after 180° rotation.
DISABLED
Prints formats without rotation.
IMAGING MODE Determines the process used to format labels, where:
MULTIPLE LABEL Formats multiple images, as memory permits, for the
fastest throughput.
 Time stamps will indicate the moment of imaging
rather than printing.
SINGLE LABEL Formats an image only after a previous format has
been printed (for the most accurate time stamps).
PAUSE MODE Allows interactive print control, where:
ENABLED
Prints only as the PAUSE Key is pressed.
DISABLED
Prints normally, without user intervention.
PEEL MODE Allows the SOP signal to initiate (via the optional GPIO
port) the feeding of labels, where:
ENABLED
Feeds labels only after SOP is received.
DISABLED
Feeds labels regardless of SOP.