Extron Electronics MVX Plus 128 VGA A User Guide - Manual (Page 57)

3-31 MVX Plus 128 VGA A Matrix Switcher • Operation
PRELIMINAR
Y
5 . One at a time , press and hold the Output 3 button and then the Output 4
buttons (figure 3-51) for approximately 2 seconds until each button lights
steadily. The output 3 and output 4 video and audio signals are unmuted.
3
4
3
4
Press and hold the Output 3 button.
The button lights amber to indicate that
the RGBHV and audio outputs are not muted.
Press and hold the Output 4 button.
The button lights green to indicate that
the RGBHV output is not muted.
(RGBHV only because only video is tied to output 4.)
Mute outputs one at a time.
= Blinking button
2 seconds
2 seconds
Figure 3-51 — Unmute the outputs
N If both RGBHV and audio are selected, the unmuting action toggles both the
video and the audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
6 . Press and release the View button to exit View-only mode (figure 3-52).
VIEW All input buttons and output buttons
return to unlit or background illumination.
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.
Figure 3-52 — Press the View button to exit View-only mode