Extron Electronics MVX Plus 128 VGA A User Guide - Manual (Page 132)

HTML Operation, cont’d
MVX Plus 128 VGA A Matrix Switcher • HTML Operation 6-10
PRELIMINAR
Y
Email address fields
The eight Email address fields identify the e-mail addresses of the personnel to
whom the MVX Plus 128 VGA A switcher e-mails notification of its failure and
repair status. Standard e-mail address conventions (nnnnn@xxx.com) apply.
The check boxes and drop boxes associated with each address field permit the
operator to specify specific criteria under which the switcher will e-mail recipients.
In the associated Missing Input drop boxes, select the inputs to monitor for
presence or absence of a signal. Check the Fans and Power boxes to monitor the
cooling and power supplies. In the associated E-Mail Options drop box, select
whether the recipient is to be e-mailed of failures, fixes, both, not notified, or to
be removed from the e-mail list. The Suspend option is useful for temporarily
removing personnel from the e-mail list when they are unavailable, such as on
travel or vacation. Deleting an e-mail addressee and clicking the Submit button
removes the recipient from e-mail notification completely.
Firmware Upgrade page
The Firmware Upgrade page provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip. Access the Firmware
Upgrade page (figure 6-8) by clicking the Firmware Upgrade link on the System
Configuration page.
Select Email Settings.
Refresh.
Select System Configuration.
Figure 6-8 — Firmware Upgrade page
Update the switcher firmware as follows:
N The Firmware Upgrade page is only for replacing the firmware that controls
all switcher operation. To insert your own custom HTML pages, see “File
Management Page”, on page 6-11.
1 . Visit the Extron Web site, www.extron.com, select the CrossPoint/MAV Plus
product category, select the latest firmware installation package (*.exe file) for
the switcher, and download the file
. Note the folder to which you save the
firmware file.