Extron Electronics MVX Plus 128 VGA A User Guide - Manual (Page 138)

HTML Operation, cont’d
MVX Plus 128 VGA A Matrix Switcher • HTML Operation 6-16
PRELIMINAR
Y
Changing the RGB delay
The RGB delay interval defines how long the screen is blanked when switching to a
new input for the selected output.
Change the RGB delay as follows:
1 . Click the Output drop box. A drop-down scroll box appears (figure 6-16).
Figure 6-16 — Output selection drop box
2 . Click and drag the slider or click on the scroll up button or the scroll down
button until the desired output is visible.
3 . Click the desired output.
4 . Click the RGB delay drop box. A drop-down scroll box appears (figure 6-17).
Figure 6-17 — RGB delay drop box
5 . Click the desired RGB delay.