Delta 1.07 VFD-D D - Manual (Page 89)

Chapter 4 Parameter Settings|DD Series
4-65
08 Multi-step Speed Parameter
This parameter can be set during operation.
Zero Step Speed Frequency
1 st Step Speed Frequency
2 nd Step Speed Frequency
3 rd Step Speed Frequency
4 th Step Speed Frequency
5 th Step Speed Frequency
6 th Step Speed Frequency
7 th Step Speed Frequency
8 th Step Speed Frequency
9 th Step Speed Frequency
10 th Step Speed Frequency
11 th Step Speed Frequency
12 th Step Speed Frequency
13 th Step Speed Frequency
14 th Step Speed Frequency
15
th
Step Speed Frequency
Control mode VF VFPG SVC FOCPG FOCPM Factory setting: 0.00
Settings 0.00~120.00Hz
The Multi-Function Input Terminals (refer to Pr.02-01 to 02-05) are used to select one of the AC motor
drive Multi-step speeds. The speeds (frequencies) are determined by Pr.08-00 to 08-15 as shown above.