Filtering, 1 overview, 2 configure a filtering rule – ZyXEL Communications ZyXEL Dimension GS-4012F User Manual
Page 96: Chapter 10 filtering, 1 overview 10.2 configure a filtering rule, Figure 40 filtering, Table 19 filtering

GS-4012F/4024 User’s Guide
Chapter 10 Filtering
95
C
H A P T E R
10
Filtering
This chapter discusses static MAC address filtering.
10.1 Overview
Filtering means sifting traffic going through the switch based on the source and/or destination
MAC addresses and VLAN group (ID).
10.2 Configure a Filtering Rule
Click Advanced Application, Filtering in the navigation panel to display the screen as shown
next. Scroll down to the bottom of the screen to view the summary table for the settings.
Figure 40 Filtering
The following table describes the related labels in this screen.
Table 19 FIltering
LABEL
DESCRIPTION
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Name
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.