ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 266)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 265
40.10 mvr Commands
The following table lists the mvr commands in configuration mode.
forbidden
list>
Sets forbidden port(s) to normal
port(s).
inactive Enables the specified VLAN.
ip address
address>
Deletes the IP address and subnet
mask from this VLAN.
ip address
default-gateway
Deletes the default gateway from this
VLAN.
untagged
list>
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
normal
list>
Specifies the port(s) to dynamically join
this VLAN group using GVRP
untagged
list>
Specifies the port(s) you don’t want to
tag all outgoing frames transmitted
with this VLAN Group ID.
Table 98 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION
Table 99 Command Summary: mvr Commands
COMMAND DESCRIPTION
mvr <1-4094> Enters the MVR (Multicast VLAN
Registration) configuration mode.
exit Exist from the MVR configuration
mode.
group
start-address
end-address
Sets the multicast group range for the
MVR.
inactive Disables MVR settings.
mode
compatible>
Sets the MVR mode (dynamic or
compatible).
name Sets the MVR name for identification
purposes.
no group Disables all MVR group settings.
group Disables the specified MVR group
setting.
inactive Enables MVR.
receiver-port Disables the receiver port(s).An MVR
receiver port can only receive multicast
traffic in a multicast VLAN.