Static mac forward setup, 1 overview, 2 configuring static mac forwarding – ZyXEL Communications ZyXEL Dimension GS-4012F User Manual
Page 94: Chapter 9 static mac forward setup, 1 overview 9.2 configuring static mac forwarding, Figure 39 static mac forwarding
GS-4012F/4024 User’s Guide
Chapter 9 Static MAC Forward Setup
93
C
H A P T E R
9
Static MAC Forward Setup
Use these screens to configure static MAC address forwarding.
9.1 Overview
A static MAC address is an address that has been manually entered in the MAC address table.
Static MAC addresses do not age out. When you set up static MAC address rules, you are
setting static MAC addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC
address table on a port to access the switch. See
for more information
on port security.
9.2 Configuring Static MAC Forwarding
Click Advanced Applications, Static MAC Forwarding in the navigation panel to display
the configuration screen as shown. Scroll down to the bottom of the screen to view the
summary table for the settings.
Figure 39 Static MAC Forwarding
The following table describes the labels in this screen.