ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 250)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 249
route-domain
address>/
Enables a routing domain for
configuration. See Section
40.9.5 on page 263 for more
details.
ip address Sets the IP address and subnet
mask of the out-of-band
management port.
default-gateway Sets the default gateway’s IP
address for the out-of-band
management port.
name-server Sets the IP address of a domain
name server.
route Creates a static route.
[metric ]
[name ]
[inactive]
Sets the metric of a static route
or deactivates a static route.
lacp Enables Link Aggregation
Control Protocol (LACP).
system-priority <1-65535> Sets the priority of an active port
using LACP.
loginPrecedence
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
logins username
password
Configures up to four read-only
login accounts.
logout Exits from the CLI.
mac-aging-time <10-3000> Sets learned MAC aging time.
mac-filter name mac
vlan
drop
dst/both>
Configures a static MAC
address port filtering rule.
inactive Disables a static MAC address
port filtering rule.
mac-forward name mac
vlan
interface
Configures a static MAC
address forwarding rule.
inactive Disables a static MAC address
forwarding rule.
mirror-port Enables port mirroring.
Enables port mirroring on a
specified port.
mode zynos Changes the CLI mode to the
ZyNOS format.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION