ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 295)

GS-4012F/4024 User’s Guide
294 Chapter 42 IEEE 802.1Q Tagged VLAN Commands
where
This command deletes the specified VLAN ID entry from the static VLAN table. The
following example deletes entry 2 in the static VLAN table.
Figure 201 no vlan Command Example
42.6 Enable VLAN
Syntax:
vlan
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
42.7 Disable VLAN
Syntax:
vlan
inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
42.8 Show VLAN Setting
Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
• For the AdCtl section of the last column, “-“ is a port set to normal, “x” is a forbidden
port and “F” is a fixed port.
• For the TagCtl section of the last column, “T“ is a tagged port, “U” is an untagged port.
= The VLAN ID [1 – 4094].
ras (config)# no vlan 2