ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 248)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 247
bcp-
transparency
Enables Bridge Control Protocol
(BCP) transparency.
classifier <[packet-
format
<802.3untag|802.3tag
| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan
id>][ethernet-type
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac
mac-addr>] [source-
port ]
[destination-mac
]
[dscp <0-63> ] [ip-
protocol
num|tcp|udp|icmp|egp
| ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip
addr> [mask-bits
]]
[source-socket
]
[destination-ip
[mask-bits
bits>]]
[destination-socket
]
[inactive]>
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
help Displays help information for
this command.
cluster Enables clustering in the
specified VLAN group.
member
password
str>
Sets the cluster memeber.
name Sets a descriptive name for the
cluster.
rcommand
address>
Logs into the CLI of the
specified cluster member.
default-
management band>
Specifies through which traffic
flow the switch is to send
packets.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION