ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 265)

GS-4012F/4024 User’s Guide
264 Chapter 40 Introducing the Commands
40.9.6 config-vlan Commands
The following table lists the vlan commands in configuration mode.
rip direction Sets the RIP direction in this routing domain.
vrrp authentication-
key
Sets the VRRP authentication key in the
routing domain.
no ip dvmrp Disables DVMRP in this routing domain.
ip igmp Disables IP IGMP in this routing domain.
ip ospf
authentication-key
Disables OSPF authentication key settings in
this routing domain.
ip ospf
authentication-sama
Sets the routing domain not to use the same
OSPF authentication settings as the area.
ip ospf cost Disables the OSPF cost in the routing domain.
ip ospf message-
digest-key
Sets the routing domain not to use a security
key in OSPF.
ip vrrp
authentication-key
Resets the VRRP authentication settings.
Table 97 interface route-domain Commands (continued)
COMMAND DESCRIPTION
Table 98 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
vlan <1-4094> Creates a new VLAN group.
exit Leaves the VLAN configuration mode.
fixed Specifies the port(s) to be a permanent
member of this VLAN group.
forbidden
list>
Specifies the port(s) you want to
prohibit from joining this VLAN group.
help Displays a list of available VLAN
commands.
inactive Disables the specified VLAN.
ip address Sets the IP address of the switch in the
VLAN.
manageable
Sets the IP address of the switch in the
VLAN and allow remote management
to this IP address.
default gateway Sets the default gateway IP address in
this VLAN.
name Specifies a name for identification
purposes.
no fixed Sets fixed port(s) to normal port(s).