ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 259)

GS-4012F/4024 User’s Guide
258 Chapter 40 Introducing the Commands
preempt Enables preemption mode.
primary-virtual-
ip <ip>
Sets the primary VRRP virtual
gateway IP address.
priority <1-254> Sets the priroity of the uplink-
gateway.
secondary-
virtual-ip <ip>
Sets the secondary VRRP
virtual gateway IP address.
service-control ftp Allows FTP access on the
specified service port.
http Allows HTTP access on the
specified service port and
defines the timeout period.
https
number>
Allows HTTPS access on the
specified service port.
icmp Allows ICMP management
packets.
snmp Allows SNMP management.
ssh Allows SSH access on the
specified service port.
telnet
number>
Allows Telnet access on the
specified service port.
snmp-server [contact
contact>] [location
]
Sets the geographic location
and the name of the person in
charge of this switch.
get-community Sets the get community.
set-community Sets the set community.
trap-community Sets the trap community.
trap-destination Sets the IP addresses of up to
four stations to send your
SNMP traps to.
spanning-tree Enables STP on the switch.
Enables STP on a specified
port.
path-
cost <1-65535>
Sets the STP path cost for a
specified port.
priority
<0-255>
Sets the priority for a specified
port.
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-30>
Sets Hello Time, Maximum Age
and Forward Delay.
help Displays help information.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION