ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 290)

GS-4012F/4024 User’s Guide
Chapter 42 IEEE 802.1Q Tagged VLAN Commands 289
Figure 193 CPU VLAN Configuration and Activation Example
42.4 Global VLAN1Q Tagged VLAN Configuration Commands
This section shows you how to configure and monitor the IEEE 802.1Q Tagged VLAN.
42.4.1 GARP Status
Syntax:
show garp
This command shows the switch’s GARP timer settings, including the join, leave and leave all
timers.
An example is shown next.
Figure 194 GARP STATUS Command Example
42.4.2 GARP Timer
Syntax:
garp join leave leaveall
where
ras (config)# vlan 3
ras (config-vlan)# inactive
ras # show garp
GARP Timer
------------------------
Join Timer = 200
Leave Timer = 600
Leave All Timer = 10000
ras#
join = This sets the duration of the Join Period timer for GVRP in
milliseconds. Each port has a Join Period timer. The allowed Join Time
range is between 100 and 32767 milliseconds; the default is 200
milliseconds.