ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 277)

GS-4012F/4024 User’s Guide
276 Chapter 41 Command Examples
41.7.3 no trunk
Syntax:
no trunk
no trunk lacp
no trunk interface
where
• An example is shown next.
• Disable trunk one (T1).
• Disable LAPC on trunk three (T3).
• Remove ports one, three, four and five from trunk five (T5).
Figure 174 no trunk Command Example
41.7.4 no port-access-authenticator
Syntax:
no port-access-authenticator
no port-access-authenticator reauthenticate
no port-access-authenticator
where
An example is shown next.
• Disable authentication on the switch.
• Disable re-authentication on ports one, three, four and five.
• Disable authentication on ports one, six and seven.
Disables the trunk group.
lacp Disables LACP in the trunk group.
interface Removes ports from the trunk group.
ras(config)# no trunk T1
ras(config)# no trunk T3 lacp
ras(config)# no trunk T5 interface 1,3-5
= Disables port authentication on the switch.
reauthenticate = Disables the re-authentication mechanism on the listed port(s).
= Disables authentication on the listed ports.