ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 286)

GS-4012F/4024 User’s Guide
Chapter 41 Command Examples 285
Figure 189 qos priority Command Example
41.8.14 name
Syntax:
name
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set a name for the ports.
Figure 190 name Command Example
41.8.15 speed-duplex
Syntax:
speed-duplex
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the speed to 10 Mbps in half duplex mode.
Figure 191 speed-duplex Command Example
ras(config)# interface port-channel 1,3-5
ras(config-interface)# qos priority 4
Sets a name for your port interface(s).
ras(config)# interface port-channel 1,3-5
ras(config-interface)# name Test
full|100-half|100-
full|1000-full> Sets the duplex mode (half or full) and speed (10, 100 or 1000 Mbps)
of the connection on the port. Selecting auto (auto-negotiation)
makes one port able to negotiate with a peer automatically to obtain
the connection speed and duplex mode that both ends support.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# speed-duplex 10-half