ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 256)

GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 255
learn inactive Disables MAC address learning
on the specified port(s).
address-limit Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
queue level <0-7> priority
<0-7>
Sets the priority level-to-
physical queue mapping.
radius-server host [acct-port
]
[key ]
Sets the IP address of the
external RADIUS server, UDP
port and shared key.
remote-
management
start-addr
end-addr
service
icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
router dvmrp Enables and enters the DVMRP
configuration mode.
exit Leaves the DVMRP
configuration mode.
threshold
value>
Sets the DVMRP threshold
value.
igmp Enables and enters the IGMP
configuration mode.
exit Leaves the IGMP configuration
mode.
ospf Enables and enters the OSPF
configuration mode.
area Enables and sets the area ID.
area
authentication
Enables simple authentication
for the area.
area
authentication
message-digest
Enables MD5 authentication for
the area.
area
default-cost <0-
65535>
Sets the cost to the area.
area
name
Sets a descriptive name for the
area for identification purposes.
area
stub
Enables and sets the area as a
stub area.
area
stub no-summary
Sets the stub area not to send
any LSA (Link State
Advertisement).
area
virtual-link
Sets the virtual link ID
information for the area.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION