ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 243)

GS-4012F/4024 User’s Guide
242 Chapter 40 Introducing the Commands
40.9.2 Enable Mode
The following table describes the commands available for Enable mode.
traceroute
[in-band|out-of-band|vlan
]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device.
help Displays help information for this command.
Table 93 Command Summary: User Mode (continued)
COMMAND DESCRIPTION
Table 94 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate
<1|2|3|4|5
>
Sets the console port baud rate.
1:38400
2:19200
3:9600
4:57600
5:115200
boot config Restarts the system with the specified
configuration file.
configure Accesses Configuration mode. See
Section 40.9.3 on page 246 .
copy running-config tftp Backs up running configuration to the
specified TFTP server with the specified
file name.
tftp config Restores configuration with the specified
filename from the specified TFTP server.
flash Restores firmware via TFTP.
disable Exits Enable (or privileged) mode.
enable Accesses Enable (or privileged) mode.
erase running-config Resets to the factory default settings.
exit Exits Enable (or privileged) mode.
help Displays help information.
history Displays a list of command(s) that you
have previously executed.
igmp-flush Removes all IGMP information.
kick session> Disconnects the specified TCP session.
logout Exits Enable (or privileged) mode.
mac-flush Clears the MAC address table.