ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 278)

GS-4012F/4024 User’s Guide
Chapter 41 Command Examples 277
Figure 175 no port-access-authenticator Command Example
41.7.5 no ssh
Syntax:
no ssh key
no ssh known-hosts
no ssh known-hosts [1024|ssh-rsa|ssh-dsa]
where
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
• Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption
key from the list of known hosts.
Figure 176 no ssh Command Example
41.8 interface Commands
These are some commonly used commands that belong to the interface group of
commands.
ras(config)# no port-access-authenticator
ras(config)# no port-access-authenticator 1,3-5 reauthenticate
ras(config)# no port-access-authenticator 1,6-7
key Disables the secure shell server encryption key. Your switch
supports SSH versions 1 and 2 using RSA and DSA
authentication.
known-hosts Remove specific remote hosts from the list of all known hosts.
known-hosts
[1024|ssh-rsa|ssh-dsa] Remove remote known hosts with a specified public key (1024-
bit RSA1, RSA or DSA).
ras(config)# no ssh key rsa1
ras(config)# no ssh known-hosts 172.165.1.8
ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa