ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 247)

GS-4012F/4024 User’s Guide
246 Chapter 40 Introducing the Commands
40.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
known-hosts Displays known SSH hosts information.
key Displays internal SSH public and private
key information.
session Displays current SSH session(s).
system-information Displays general system information.
time Displays current system time and date.
timesync Displays time server information.
trunk Displays link aggregation information.
vlan Displays the status of all VLANs.
Displays the status of the specified VLAN.
vlan-stacking Displays VLAN stacking settings.
vlan1q gvrp Displays GVRP settings.
port-isolation Displays port isolation settings.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command ] Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
traceroute [in-
band|out-of-
band|vlan
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
help Displays help information for this
command.
write memory Saves current configuration to the
configuration file the switch is currently
using.
Saves current configuration to the
specified configuration file on the switch.
Table 94 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 95 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password Changes the administrator
password.
bandwidth-
control
Enables bandwidth control.