ZyXEL Communications ZyXEL Dimension GS-4012F - Manual (Page 273)

GS-4012F/4024 User’s Guide
272 Chapter 41 Command Examples
41.4 traceroute
Syntax:
traceroute [in-band|out-of-band|vlan ][ttl <1-
255>] [wait <1-60>] [queries <1-10>]
where
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100 .
Figure 165 traceroute Command Example
41.5 Enabling RSTP
To enable RSTP on a port. Enter spanning-tree followed by the port number and press
[ENTER]
.
The following example enables RSTP on port 10.
= The IP address of an Ethernet device.
[in-band|out-of-
band|vlan id> ] = Specifies the network interface or the VLAN ID to which the
Ethernet device belongs.
[ttl <1-255>] = Specifies the Time To Live (TTL) period.
[wait <1-60>] = Specifies the time period to wait.
[quesries <1-10>] = Specifies how many tries the switch performs the traceroute
function.
ras> traceroute 192.168.1.100
traceroute to 192.168.1.100, 30 hops max, 40 byte packet
1:192.168.1.100 (10 ms) (10 ms) (0 ms)
traceroute done: