Tektronix AWG610 - Manual (Page 455)

Appendix G: Sequence File Text Format
AWG610 Arbitrary Waveform Generator User Manual
G-3
Jump Table Definition. The 16 entries of the table definition follow the table jump
header TABLE_JUMP and a space, and must be delimited by comma (,):
TABLE_JUMP , , , , ,
, , , , , , ,
, , ,
Each of these entries must be:
::= (range: 1 to 8000)
0 (No definition)
Logic Jump Definition. The 4 entries of the logic table definition follow the logic
jump header LOGIC_JUMP and a space, and must be delimited by comma (,):
Logic Jump , ,
,
::= –1 (for X, don’t care),
0 (for L, low state) or
1 (for H, high state)
Jump Mode Selection. The jump table or logic jump definition you define is
effective depending on the jump mode setting as follows:
JUMP_MODE
::= TABLE, LOGIC or SOFTWARE
Jump Timing and Strobe Settings.
JUMP_TIMING
::= SYNC or ASYNC
STROBE
::= 0 (for Off) or
1 (for On)