Tektronix AWG610 - Manual (Page 361)

AWG610 Arbitrary Waveform Generator User Manual
B-1
Appendix B: Performance Verification
Two types of Performance Verification procedures can be performed on this
product: Self Tests and Performance Tests. You may not need to perform all of
these procedures, depending on what you want to accomplish.
H Verify that the AWG610 Arbitrary Waveform Generator is operating
correctly by running the self tests which begin on page B–3.
Advantages: These procedures require minimal time to perform, require no
additional equipment, and test the internal hardware of the AWG610
Arbitrary Waveform Generator.
H If a more extensive confirmation of performance is desired, complete the self
test, and then do the performance test beginning on page B–7.
Advantages: These procedures add direct checking of warranted specifica-
tions. They require more time to perform and suitable test equipment is
required. (Refer to Equipment Required on page B–8).
Conventions
Throughout these procedures the following conventions apply:
H Each test procedure uses the following general format:
Title of Test
Equipment Required
Prerequisites
Procedure
H Each procedure consists of as many steps, substeps, and subparts as required
to do the test. Steps, substeps, and subparts are sequenced as follows:
1. First Step
a. First Substep
H First Subpart
H Second Subpart
b. Second Substep
2. Second Step