Tektronix AWG610 - Manual (Page 367)

Appendix B: Performance Verification
AWG610 Arbitrary Waveform Generator User Manual
B-7
Performance Tests
This section contains a collection of procedures for checking that the AWG610
Arbitrary Waveform Generator performs as warranted.
The procedures are arranged in thirteen logical groupings, presented in the
following order:
Table B-1: Performance test items
Titles Test items See (specifications)
Operating mode tests Continuous, Triggered, andGatedmode normality Page A-2
Amplitude and offset accuracy tests (normal out) Amplitude accuracy, and DC offset accuracy Page A-3
Amplitude, DC offset and rise time accuracy
tests (direct DA out)
Amplitude accuracy, DC offset accuracy and Rise time
accuracy
Page A-4
Pulse response tests (normal out) Rise time accuracy, Abberation, andFlatness Page A-4
Sine wave tests Harmonics level accuracy, andNoise level accuracy Page A-4
Internal trigger tests Trigger interval normality Page A-3
Trigger input tests Trigger level accuracy, andTrigger function normality Page A-8
Event input andenhancedmode tests External event input function normality, and
Event mode normality
Page A-8
1/4ĂClockĂfrequencyĂandĂ10 MHz reference input
tests
1/4ĂclockĂoutputĂfrequencyĂandĂ
Reference input normality accuracy
Page A-3
1/4ĂClock output levelĂtests Clock output normality Page A-6
10 MHz Reference output levelĂtests 10 MHz Reference Clock output normally Page A-6
Marker output tests Marker output level accuracy Page A-6
Marker delay tests Marker delay function
The performance tests check all of the characteristics that are designated as
checked in Appendix A:Specifications. (The characteristic items that must be
checked are listed with the check mark (
n) in Appendix A: Specifications).
NOTE. These procedures extend the confidence level provided by the basic
procedures described on page B–3. The basic procedures should be done first,
and then these procedures performed if desired.