Tektronix AWG610 - Manual (Page 339)

AWG610 Arbitrary Waveform Generator User Manual
3-221
FG Mode
The AWG610 Arbitrary Waveform Generator provides the Function Generator
(FG) mode to output standard function waveform. This section describes the FG
mode.
FG mode Signals are created and output using the following process:
H Select the waveform type.
H Set the output parameters such as frequency and amplitude.
H Turn the OUTPUT button to ON.
Select the
waveform type
Set the output
parameters
Push the OUTPUT
button
Output
Figure 3-71: Outline flow for producing Function Generator signal
Figure 3-72: FG mode screen