Tektronix AWG610 - Manual (Page 352)

Appendix A: Specifications
A-6
AWG610 Arbitrary Waveform Generator User Manual
Table A-7: Auxiliary outputs
Characteristics Description PV reference page
Marker 4
Number of markers 2 ( Complementary. Marker1, Marker1, Marker2, Marker2 )
Level (Hi/Lo) -1.10 V to +3.00 V, into a 50 W load
-2.20 V to +6.00 V, into a 1 MW load
Maximum Output 2.5 V
pĆp
, into a 50 W load
Resolution 0.05 V
n Accuracy
Within "(0.1 V +5 % of setting), into a 50 W load
Page B-58
Rise and fall times (20 % to 80 %),
Typical
150 ps (2 V
pĆp
, Hi: +1 V, Lo: -1 V, into a 50 W load)
Variable delay
n Range 0 ns to +1.5 ns Page B-61
n Accuracy -30 % to +10%, at 1.5 ns setting
Resolution 100 ps
Skew, Typical 70 ps (2 V
p-p
, Hi: +1 V, Lo: -1 V, at delay 0 ns)
Period jitter Measured by TDS694C-1MHD with TDSJIT1
Typical Refer to Table A-9.
Cycle to cycle jitter Measured by TDS694C-1MHD with TDSJIT1
Typical Refer to Table A-10.
Connector Front panel SMA connectors
1/4 Clock output
n Level ECL 100 K compatible (internally loaded in 50 W to -2 V and 43 W
series terminated)
Page B-54
Period jitter Measured by TDS694C-1MHD with TDSJIT1
Typical Refer to Table A-9.
Cycle to cycle jitter Measured by TDS694C-1MHD with TDSJIT1
Typical Refer to Table A-10.
Connector Rear panel BNC connectors
10 MHz Reference clock out
n Amplitude
y 1 V
pĆp
, into a 50 W load
Max 3 V
pĆp
, open
Page B-56
Impedance 50 W, AC coupling
Connector Rear panel BNC connector
4 The characteristics are specified at the end of the SMA cable (012Ć1565ĆXX).