Tektronix AWG610 - Manual (Page 45)

Operating Basics
AWG610 Arbitrary Waveform Generator User Manual
2-7
Menu Operations
This section describes the AWG610 Arbitrary Waveform Generator menu system
and numeric and text input methods.
The AWG610 Arbitrary Waveform Generator uses menus to make selections.
There are four menu buttons, labeled EDIT, SETUP, APPL, and UTILITY, as
shown in Figure 2–5. Pushing a menu button displays the corresponding screen
and menu buttons. These menus let you edit waveforms, initialize instrument
settings, define instrument operation, and specify waveform output parameters.
You select items within the displayed menu by pushing the bottom or side bezel
button nearest to the menu item. These buttons consist of seven bottom buttons
and five side buttons, as shown in Figure 2–5. These menu bezel buttons are
referred to as bottom menu buttons (or bottom buttons) and side menu buttons
(or side buttons).
The CLEAR MENU button cancels the current menu operation, clears the
current menus from the screen, and exits to the previous instrument state.
Side menu bezel buttons
(side buttons)
Menu buttons
Bottom menu bezel buttons
(bottom buttons)
CLEAR MENU button
Figure 2-5: Menu buttons, bezel menu buttons, and the CLEAR MENU button
Menu System