Kodak SRP 30 - Manual (Page 96)

Settings
Installing the Software
1. Touch:
•
Settings
•
Machine settings
•
Install Software
2. Touch Load CD or select the software component in the list that you wish to
enable. (See Enabling the Software on Page 4-22.)
3. Touch Install.
The screen displays a safety check message asking if the machine settings were
saved on an external data medium.
a. If you answer Yes, the input screen opens.
If you answer No, the system stops the operation. Save the machine settings
before proceeding.
b. If you are loading a CD, or if you selected a software component in the list,
enter the alphanumeric enable code that you received from Kodak.
After you install or enable the software, the system performs an automatic
restart. After the restart, the buttons pertaining to the new software functions are
accessible.
If the equipment does not function correctly after the new start, touch Preversion
(previous version) to restore the software to the configuration before the update.
KODAK PROFESSIONAL SRP 30 Laser Printer 4-21