Kodak SRP 30 - Manual (Page 279)

Operator’s Guide
Cleaning the Filters in the ASTOR and Water Supplies
IMPORTANT: Close the water tank cover (3) before beginning this procedure.
1 ASTOR supply
2 Water supply
1. Close the drain valves on the top of the 3 supplies.
2. Unscrew the cap nuts (1 and 2) and carefully remove them.
NOTE:
IMPORTANT:
The cap nuts are full of liquid.
3. Remove the filters and rinse them in running water.
4. Reinstall the filters.
Do not interchange the ASTOR filters with the water filters.
5. Open the drain valves again.
8-26 KODAK PROFESSIONAL SRP 30 Laser Printer