Kodak SRP 30 - Manual (Page 179)

Operator’s Guide
Changing the Mirror Box for 120 Films
You must mount a different mirror box before you can scan 120 films.
1. Hold the mirror box (1) on the sides with both hands and pull it out towards you.
2. Place the new mirror box in the guide rails and push it in towards the lamp house
until it locks in.
Changing the Film Mask
CAUTION: In the Autoprint mode, do not remove the film mask until the
film strip has been completely scanned and ejected into the film
box below the scanner.
In the Manual Positioning mode, touch the Eject button to eject
the film strip or to center smaller film pieces (<3 frames) so that
they won’t be damaged when the film mask is removed.
When the film mask is changed, the pixel correction (PIKO) is
performed automatically. Do not remove the film mask while
PIKO is performed.
To remove the film mask, pull it to the front and lift it up and out of the guide.
To install the film mask, place it in the guide and push in until it locks in place.
6-8 KODAK PROFESSIONAL SRP 30 Laser Printer