Kodak SRP 30 - Manual (Page 296)

Maintenance
Cleaning the Dryer Rack
The necessary tools are:
•
Screwdriver or coin
•
Lint-free cloth and warm water
1. Remove the dryer cover. Use a coin to turn the lock by 90º.
2. Loosen the locking screw (knurled screw 1) of the dryer rack. Pull out the rack on
the telescopic rails.
3. Remove only the feed roller set after unscrewing the knurled screw (2), and put
the rollers in water to soak overnight.
CAUTION: If the rollers will not be mounted prior to the next automatic
startup, be sure to disable the automatic MBL in order to
prevent a paper jam.
4. Before starting to work the next day, wipe off all deposits on the feed rollers and
the feed plate with a lint-free cloth.
5. Clean the guide roller behind the feed rollers with water and a lint-free cloth.
6. Check all foam plastic rollers (3) for damage and replace them if necessary.
KODAK PROFESSIONAL SRP 30 Laser Printer 8-43