Kodak SRP 30 - Manual (Page 293)

Operator’s Guide
Cleaning the Processing Racks
Purpose:
To ensure optimum processing quality.
Necessary tools:
•
Splash guards for the CD rack and front of the paper processor (supplied with the
printer pre-pack)
•
Soft brush
•
Lint-free cloth
Prerequisites:
•
Schedule the monthly cleaning of the processing racks for a day when you are also
cleaning the CD feed unit, tank crossovers, and squeegee unit.
•
Clean the CD feed unit, tank crossovers, and squeegee unit first. (See Page 8-19
for instructions.)
•
Before you reinstall those components, do the steps below to clean the processing
racks.
WARNING: Wear protective gloves and goggles during all cleaning
operations when there is the potential to come in contact with
chemicals.
CAUTION: Chemical splashes may stain the covers. Remove any splashes
immediately with water.
1. Fasten the larger splash guard (1) to the front of the paper processor to protect
the area from chemical splashes.
2. If not already in place (from removing the CD feed unit), fasten the smaller splash
guard (2) to the CD rack to prevent the CD solution from being contaminated by
the BX (bleach-fix) solution.
8-40 KODAK PROFESSIONAL SRP 30 Laser Printer