Kodak SRP 30 - Manual (Page 125)

Operator’s Guide
Creating, Editing, and Deleting Configurations
The configuration lists appearing on the print configuration screens contain all of the
configurations that have been created for the related tasks.
The screen below is a result of touching the Order button shown on the
previous page. This screen is used as an example for all print configurations. NOTE:
Creating a New Configuration
1. If the configuration depends on the film mask, touch Film mask and make a
selection.
2. Touch New.
A screen opens displaying the fields that contain the existing preset values.
3. Enter the appropriate settings for the new configuration.
4. Touch Save as and enter a meaningful name in the input screen.
•
Maximum of 30 characters
•
Permissible characters: - . : , ; + ! ? = ( ) _ / & % $ and blanks
Creating a New Configuration Based on an Existing One
1. Touch a similar configuration in the list. (If necessary, use the arrow buttons to
scroll up or down the list.)
2. Touch Edit. In the next screen, enter the settings that differ from the original
configuration.
3. Touch Save as and enter a new name in the input screen.
•
Maximum of 30 characters
•
Permissible characters: - . : , ; + ! ? = ( ) _ / & % $ and blank
4-50 KODAK PROFESSIONAL SRP 30 Laser Printer