Kodak SRP 30 - Manual (Page 152)

Settings
Reproduction Configurations
Use these order configurations to print files without TFS (Total Film Scanning).
Printing from a reproduction configuration is done without preview, and the
configuration cannot be changed. The image is printed in the middle of a large size
(400 dpi), for items such as CD inlays.
1. From the Order configurations - List screen (Page 4-67), touch New, or select
an existing reproduction configuration (designated by “R”) and touch Edit.
2. Select a Film mask and Film type.
3. Touch Config. type and select Reproduction.
NOTE: The Config. type can only be changed if you selected New from the
Order configurations - List screen.
4. Select a Back print or set to Off.
5. Touch PpF and select the number of prints per frame (preset = 1). To create a
value not listed, use the New entry for PpF option.
6. Touch:
•
C paper config. and select a paper configuration for Classic.
•
C cut length and select a cut length for Classic.
7. Touch Save as and enter a name.
Touch Cancel to return to the previous screen without saving.
KODAK PROFESSIONAL SRP 30 Laser Printer 4-77