Kodak SRP 30 - Manual (Page 184)

Production
Automatic Order Numbering
The first order always starts with 1. (Order numbers are reset to 1 after a system
reset or shutdown.)
The entered number is automatically incremented for each order that follows. The
number cannot be changed.
End of Order (Automatic or Manual)
Orders are terminated by End of order. The sorter moves so that the prints of the
orders can be put in different bins.
A new order begins when a frame or slide is scanned or a digital image file is loaded
after end of order. This new order must receive a new order number either
automatically or manually.
The sorter moves on without an end of order if an order exceeds the capacity of one
bin.
Splices in the paper rolls are cut separately and the corresponding pieces of paper
are deposited in the print order stacker.
An automatic end of order occurs when:
•
The film drive moves a film strip out when in Autoprint mode.
•
You change the print mode.
•
You change the film mask.
•
You press the Stop key on the main computer.
•
You touch the red Stop button on the screen.
You can initiate a manual end of order by touching the End of order button. A
manual end of order is required:
•
In the Manual Positioning and Slide Print modes
•
If the Automatic end of order function has been disabled
•
For film strips shorter than the Film length parameter during or after the handling
of the last strip
See Other Settings in Chapter 4 for information on:
•
Enabling/disabling the Automatic end of order function
•
Setting the Film length parameter for the automatic end of order (400 mm are
preset)
NOTE: All information needed for pricing is saved for each completed order.
KODAK PROFESSIONAL SRP 30 Laser Printer 6-13